VaporFi Australia - Rebel 3 Manual & Accessories

The king of the vape pens, the VaporFi Rebel 3 is a major achievement in the world of high-tech vaporizers. This ultra-high capacity 5.8 ml device comes with a built-in 3000 mAh battery to get you through the day with plenty of e-liquid juice and battery life to spare. This video will walk you through all the steps to setup your Rebel 3 for the first time, including how to prime it. You will also see all of the Rebel 3’s major features and learn how to disassemble it for proper cleaning. This VaporFi starter kit is the best vape starter kit for advanced vapers who love a pen style device.

VIDEO: Getting Started with the Rocket 3 Vaporizer

VaporFi Australia - Rebel 3 Manual & Accessories - Cover

Rebel 3 Manual

The following information will help you get started with your new Rebel 3 vaporizer.

ATOMIZER HEAD PRIMING

When getting ready to use the provided 0.5ohm atomizer, it is important that you prime the atomizer to avoid a burnt hit. This is an important cost saving measure. Unscrew the atomizer base from the tank and remove the atomizer by unscrewing it from the base. You will next take your e-liquid of choice and drop 3-5 drops into the center of the atomizer. To avoid flooding the atomizer, do not exceed 5 drops. Once you have completed this task, screw atomizer into the atomizer base and proceed to filling your tank with your e-liquid.

TANK FILL PROCESS

After unscrewing the atomizer base to prime the atomizer, take your liquid and proceed to pour along the sidewalls of the tank, avoiding the center air pipe. After filling the tank, screw the atomizer base back onto the tank. Using short breaths, inhale from the drip tip up to 5 times and allow the tank to sit for at least 10 minutes to give the atomizer time to soak in your liquid. NOTE: Do not overfill the tank; also ensure to avoid the liquid from going above the opening of the center air pipe.

NOTE: Do not overfill the tank; also ensure to avoid the liquid from going above the opening of the center air pipe.

VaporFi Australia - Rebel 3 Manual & Accessories - Parts

POWERING THE DEVICE

To turn on the Rebel 3 battery, click the power button 5 times continuously. You will do the same in order to turn the device off as well. If the device does not turn on, you must use the USB cord (Included) to charge the device.

NOTE: Please let the battery fully charge for best results.

USING THE DEVICE

Once the battery has fully charged, screw the atomizer base, with tank, onto the battery. Click the power button 5 times to turn battery on. Hold the power button while inhaling from the drip tip, then release the power button once the desired vapor production is achieved.

NOTE: If you hold the button for more than 10 seconds, the output will shut off automatically and the button light will blink 8 times.

PASS-THROUGH

The Rebel 3 allows for you to vape while the device is charging using the provided USB cord.

NOTE: While it is possible to continue use during charging, it drastically slows down the charging process.

VaporFi Australia - Rebel 3 Manual & Accessories - Diagram

VaporFi Australia - Rebel 3 Manual & Accessories - Cover Espanol

Rocket 3 Manual (Español)

La siguiente información le puede ayudar a familiarizarse con el cigarro electrónico Rocket 3. Por favor use la forma de abajo para cualquier pregunta relacionada con este producto.

CEBADO DE LA CABEZA DEL ATOMIZADOR

Cuando esté pronto para utilizar el atomizador de 0,5 ohm provisto, es importante cebar el atomizador para evitar una pitada quemada. Esta puede ser una medida que ahorre muchos costos. Desatornille la base del atomizador del tanque y retire el mismo desenroscándolo de la base. A continuación tome su “e-líquido” elegido y deje caer 3-5 gotas en el centro del atomizador. Para evitar inundar el atomizador, no exceda las 5 gotas. Una vez que haya completado esta tarea, atornille el atomizador en la base del mismo y proceda a llenar su tanque con el e-líquido.

PROCESO DE LLENADO DEL TANQUE

Luego de desenroscar el atomizador para cebarlo, tome su líquido y continúe vertiéndolo a lo largo de las paredes laterales del tanque, evitando el tubo de aire central. Después de llenar el tanque, atornille la base del atomizador nuevamente en el mismo. Con respiraciones cortas, inhale desde la punta de goteo hasta 5 veces y permita que el tanque repose por al menos 10 minutos para darle tiempo al atomizador a que se sumerja en su líquido.

NOTA: No llene demasiado el tanque. También asegúrese de evitar que el líqui

ANILLO DE CONTROL DE FLUJO DE AIRE

Al girar el anillo de control de flujo de aire hacia la derecha, se expondrá el orificio de flujo de aire. Por lo tanto, cuanto más expuesto está este orificio, mayor será el flujo de aire.

VaporFi Australia - Rebel 3 Manual & Accessories - Parts Espanol

ENCENDIDO DEL DISPOSITIVO

Para encender la batería del Rebel 3, haga clic en el botón de encendido 5 veces continuamente. Es necesario hacer lo mismo para apagar el dispositivo. Si el dispositivo no se enciende, debe utilizar el cable USB (incluido) para cargar el dispositivo.

NOTA: Por favor deje que la batería se cargue completamente para obtener mejores resultados.

PASS-THROUGH

La tecnologia “Pass-Through” le permite usar el vaporizador Rebel 3 mientras carga con el cable USB suministrado.

NOTA: Aunque que es posible continuar el uso durante la carga, esto disminuye drásticamente el proceso de carga.

VaporFi Australia - Rebel 3 Manual & Accessories - Diagram Espanol


Shop the Rebel 3 & Accessories Online

Check out the latest colors and accessories for VaporFi’s Rebel 3 vape pen.

Rebel 3 Starter Kit

Check out our starter kit and get off on the right foot with this vaporizer package.

Features of this Product:
  • 1 Rebel 3 Tank (with pre-installed 0.25ohm Atomizer)
  • 1 Rebel 3 Battery
  • 1 0.5 ohm Rebel 3 Atomizer
  • 1 USB Cable
  • 1 Wall Adapter
  • 1 User Manual

Rebel 3 Bundle

Choose between black and stainless steel, plus get all the following stuff bundled in!

Features of this Product:
  • 1 Rebel 3 Tank
  • 1 0.25 ohm pre-installed coil
  • 5 Additional 0.25 ohm Rebel 3 Atomizers
  • 1 0.5 ohm Rebel 3 Atomizer
  • 1 Rebel 3 Battery
  • 1 Make Your Own Custom Vape Juice
  • 1 USB Charger
  • 1 Wall Adapter
  • 1 User Manual

Rebel 3 Atomizers 5-Pack

Have your replacement coils ready for when you need them and avoid any downtime!

Features of this Product:
  • 1 5-Pack of VaporFi Rebel 3 Atomizers
  • 0.5 ohm Resistance
  • 0.25 ohm Resistance
  • Compatible with VaporFi Rebel 3 Tank

Comments on Facebook

comments