How To Replace the Glass on Vaporesso NRG Tank

As we move about in the hustle and bustle of everyday life, accidents can happen that may damage your vape device. The good news is that in some instances, you don’t have to buy an entirely new device, you can just replace certain parts. 


If you’re reading this, there is a good chance that right now you’re staring at a broken Vaporesso NRG tank. Not to worry. It’s easily replaceable because certain brands, like Vaporesso, sell individual parts for replacement.  


Read on for a quick and easy step by step guide on how to replace your Vaporesso glass tank. 


Supplies for Replacing an NRG Tank


These are all the items you’ll need to replace the NRG tank:


  • A new Vaporesso NRG tank 
  • New grommets (rubber bands) if needed
  • Paper towels (it’s recommended to perform the replacement over paper towels to cut down on mess in case e-juice leaks out)
  • Tweezers 
  • Paper cup 


Step by Step Instructions


Step 1: Unscrew the tank from the mod. 


Step 2: Hold onto the metal portions of the tank and unscrew it. Remember the saying, “righty tighty, lefty loosey.” Pour out any juice that is still in the tank by dripping it into the cup. 


Step 3: Detach the glass by gripping the metal portion and gently pulling it away from the glass. Dispose of the old glass tank.


Step 4: If you need to replace the grommets or rubber bands, grab your tweezers. 


Before you remove the grommets, note where the lipped part of the grommet goes before you replace it so you know how to orient the new grommet. 

Gently pull the old grommets off with tweezers. 

Put the new grommets on with tweezers by gently tucking them securely in place to ensure an airtight seal. 


You will likely need to use your fingers to hold the grommets in place while tucking them in with the tweezers. Be very gentle and go slow as these are delicate bands. 


If needed, unscrew the top compartment to replace the small grommet inside the coil. Once this is done, Screw the top compartment back on tightly.


You really only need to replace the grommets if they are torn or ripped. Otherwise, you can leave them. 


Step 5: Gently slide the new glass tank over the coil and secure it in place. Close the tank back up making sure that all parts are screwed together tightly. 


Success! You now have a fresh, new tank ready for use. Pat yourself on the back – you just repaired your own vape!


Vaporesso NRG Replacement Parts  


Through VaporFi, you can order the Vaporesso NRG PE Replacement Glass Tank. You get one tank per order, it holds 3.5 ml of e-liquid and is made from Pyrex glass. 


The larger NRG replacement tank is the Vaporesso NRG-S which holds 8 ml of e-juice – an impressive capacity.


Both of these replacement parts are super affordable. With a cheap price and an easy repair plan, you’ll be back to enjoying your vape in no time. 


We here at the VaporFi community are here to help you find simple solutions to any vaping issues you may encounter. Whether you need a Vaporesso replacement tank or need a new battery, we’re committed to getting you back to full-capacity vaping as quickly as possible. Browse VaporFi for repair tips and shop for all your device replacement needs. 


Related posts

Would love your thoughts, please comment.x